Touchwood PU Top Coat Clear (Interior)
A radiant wood top coat for interiors, specially formulated to withstand beverage spills, chemicals, and wear and tear.
Surface preparation Sand the surface thoroughly with emery paper. Wipe clean with a dry rag and remove all traces of sanded wood. Wipe with PU Thinner. Apply two coats of PU Sanding Sealer for interiors.
Application procedure Mix the base and hardener thoroughly, using full quantities of both. Apply one or two even coats, as per the need. Make sure to stir the contents thoroughly before and during use, with a broad flat stirrer. Use a conventional spray of tip size 1.4 mm with pressure of 40-50 bar. Use a brush or roller only if the area is not suitable for spraying.
Tips Stir the contents thoroughly and apply evenly. Use the thinned mixtures immediately after it is prepared.
Tools you will need
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
we also recommend
Make Your Plan
Let us design a project plan to suit your needs.