Features
See allSurface preparation Sand the surface thoroughly with emery paper. Wipe clean with a dry rag and remove all traces of sanded wood. Wipe with PU Thinner. Apply two coats of Touchwood Sanding Sealer and sand with emery paper if needed.
Application procedure Mix the base and hardener thoroughly, using full quantities of both. Allow the mixture to stand for 10 minutes and apply two coats. Stir the contents thoroughly before and during use, with a broad flat stirrer. Use conventional spray of tip size 1.4 mm with pressure of 40 – 50 bar. Use a brush or roller only if the area is not suitable for spraying.
Tips Stir the contents thoroughly and apply evenly. Do not keep the thinned mixture without using.
Tools you will need
Available Packs
1 Coat
13.0 m2/Ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Washability
- Best-in-class
- High
- Medium
- Low
we also recommend
Touchwood PU Top Coat Pigmented (Interior)
Touchwood PU Top Coat Pigmented (Interior)
An interior wood coating that enhances the look of your furniture and wood trimmings, protecting them from scuffs, spills, and yellowing.
Excellent flow and levelling propertiesSuperior wood protection
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Guides