Apcochar (WB) - 100 is a fire-resistant coating for interior structural steel. This low VOC, water-based coating is intumescent - it swells when exposed to fire to form a layer of insulation. A poor conductor of heat, IT is certified by Exova Warrington Fire for fire safety. This cost-effective, high-performance coating is ideal for interiors with moderate humidity, and exposure to corrosion. In low-corrosion environments such as heated, well-maintained buildings, no top coat is needed.
Features
See allFinishes -Fire-Resistant
Surface preparation Remove all traces of oil, grease and other contamination before blasting. Grind sharp edges and remove weld spatter. Apply one coat of a primer such as Epilux 78, Epilux 76 or Epilux 74.
Application procedure Apply two coats of Apcochar (WB) - 100 with adequate time between coats.
Tools you will need
Available Packs
1 Coat
1.87 m2/Ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Washability
- Best-in-class
- High
- Medium
- Low
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Guides
decor lounge/dealer locator
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.