Value PVA Primer Sealer
A water-based PVA co-polymer primer-cum-sealer, perfect for use under emulsion coatings.
Surface preparation Clean the surface thoroughly. Make sure it is dry and free of all dust, contaminants and fungal growth. Remove laitance (accumulation of particles on fresh concrete) with a wire brush or sweep blast. Treat fungal growth with Berger Fungicidal solution.
Application procedure Apply one coat of Value PVA Primer Sealer stirring the contents of the can thoroughly. The outside temperature must be 30oC and relative humidity should not be greater than 85%. Apply evenly while avoiding runs and sags.
Tools you will need
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
18% +/- 2%
Estidama QCC approved
Make Your Plan
Let us design a project plan to suit your needs.