Others in this category
  • Berger Touchwood PU Primer Exterior for Wooden Surfaces
  • Berger Touchwood PU Primer Interior for Wooden Surfaces

Touchwood PU Primer Interior

A durable PU primer, designed to go under pigmented interior top coats.

A pigmented PU primer based on suitably modified polyester containing zinc stearate, titanium dioxide and other additives along with a catalyst, to provide a tough, durable and hard-wearing low sheen finish. The product has good flow and film build-up.


Excellent levellingGood hiding of baseGood resistance to household chemicals and beverages
Finishes -Low Sheen

Surface preparation Sand surface thoroughly with emery paper. Wipe it clean with a dry rag and remove all traces of sanded wood, followed by a wipe with the PU Thinner.

Application procedure Thoroughly mix the base and hardener of Touchwood PU Primer Interior using full quantities of both. Apply two even coats, as needed. Make sure to stir the contents thoroughly before and during use, with a broad, flat stirrer.

Tools you will need

Conventional Spray

Available Packs

Berger Touchwood PU Primer Interior for Wooden Surfaces
18.9 Ltr

1 Coat
10.0 m2/Ltr**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Volume Solids

56% +/- 2%
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Guides

dealer locator

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!