Features
See allSurface preparation
Sand the surface thoroughly with emery paper. Wipe clean with a dry rag and remove all traces of sanded wood. Wipe with PU Thinner. Apply two coats of Touchwood Sanding Sealer and sand with emery paper if needed.
Application procedure
Mix the base and hardener thoroughly, using full quantities of both. Allow the mixture to stand for 10 minutes and apply two coats. Stir the contents thoroughly before and during use, with a broad flat stirrer. Use a conventional spray of tip size 1.4 mm with pressure of 40-50 bar. Use a brush or roller only if the area is not suitable for spraying.
Tips
Stir the contents thoroughly and apply evenly. Do not keep the thinned mixture without using.
Tools you will need
Available Packs
1 Coat
8.75 m2/Ltr**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Washability
- Best-in-class
- High
- Medium
- Low
we also recommend
Touchwood PU Top Coat Clear Low VOC (Interior)
Touchwood PU Top Coat Clear (Interior)
Touchwood PU Top Coat Clear (Interior)
A radiant wood top coat for interiors, specially formulated to withstand beverage spills, chemicals, and wear and tear.
Superior wood protectionGood resistance to household chemicals
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Guides