Others in this category
  • Berger Touchwood Acrylic PU Sanding Sealer for Exterior  Exterior Wooden Surfaces
  • Berger Touchwood PU Sanding Sealer for Interior Wooden Surfaces
  • Berger Touchwood PU Low VOC Low Sheen Sanding Sealer

Touchwood PU Sanding Sealer Low VOC

A Polyurethane-based sanding sealer, perfect for use as a base coat for interior wood top coats.

A two-pack polyurethane sanding sealer based on suitably modified polyester containing zinc stearate and other additives to provide a tough, durable and hardwearing low sheen finish. A low VOC product, it has good flow and film build-up.

Features

See all
Low VOCExcellent levellingGood hiding of base
Finishes -Low Sheen

Surface preparation Sand the surface thoroughly with emery paper. Wipe it clean with a dry rag and remove all traces of sanded wood, followed by a wipe with the PU Thinner.

Application procedure Thoroughly the mix base and hardener of PU Sanding Sealer Low VOC, using full quantities of both. Apply two even coats as needed. Make sure to stir the contents thoroughly with a broad flat stirrer, both before and during use.

Tools you will need

Brush
Spray
Roller

Available Packs

Berger Touchwood PU Low VOC Low Sheen Sanding Sealer
18.9 Ltr

1 Coat
12.00 m2/Ltr**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Volume Solids


63% +/- 2%
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Guides

dealer locator

Locate
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!