Luxatile Epoxy Spray Compound
An epoxy compound with fine quartz aggregates, designed to be used with the Luxatile system or under PU top coats.
Surface preparation Clean the surface thoroughly. Make sure it is dry and free of all dust, contaminants and fungal growth. Remove laitance (accumulation of particles on fresh concrete) with a wire brush or sweep blast. Previous coatings must be removed completely. Treat fungal growth with Fungicidal Solution.
Application procedure Stir the contents thoroughly. Apply evenly, avoiding runs and sags. Ensure that the outside temperature is 30oC and that relative humidity is not greater than 85%.
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
68% +/- 2%
Make Your Plan
Let us design a project plan to suit your needs.