Features
Surface preparation Prepare surfaces by blasting (allow new surfaces to cure first). Acid etching is recommended, followed by a water wash. Remove laitance if any. Remove dust with a vacuum pump. Fill blowholes, if any, with an Epilux filler.
Application procedure Mix the base and hardener as per instructions. Apply Floor Guard Epoxy primer uniformly, taking care to avoid over-application. For the overcoat, use a suitable top coat once the surface is dry.
Tools you will need
Available Packs
1 Coat
9.0 m2/Ltr @ 50 Micron DFT**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Volume Solids
45% +/- 2%
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Guides