A polyamide-cured epoxy, reinforced with micaceous iron oxide for use as a build coat or intermediate coat in challenging environments.
Surface preparation Blast clean and prime the surface with Epilux primer. Remove wax, oil and grease with a solvent cleaner. Remove weld spatter if necessary, rounding off all rough weld seams and sharp edges till surface is smooth. Fill or treat surface defects.
Application procedure Apply 2 coats of Epilux 58 with an airless spray. If required, overcoat it with the recommended coating as per system chosen. Use an airless spary or conventional spray. A brush or roller should be used only for difficult shapes or touching up.
Tips Stir the contents thoroughly and apply evenly. Use the thinned mixture immediately.
Tools you will need
4.8 m2/Ltr @ 125 Micron DFT**
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
60% +/- 2%
Excellent Resistance to Abrasion
Excellent Water and Chemical resistance
Make Your Plan
Let us design a project plan to suit your needs.