A high-build, epoxy polyamide with outstanding chemical resistance that can be used as an undercoat or finish.
Surface preparation Blast clean and prime the surface with Epilux primer. Remove wax, oil and grease with a solvent cleaner. Remove weld spatter if necessary, rounding off all rough weld seams and sharp edges till surface is smooth. Fill or treat surface defects.
Application procedure Apply 2 coats of Epilux 218 with an airless spray. Overcoat it with a recommended coating as per the system chosen. Use an airless or conventional spray. For difficult shapes and touching up, use a brush or roller.
Tips Stir the contents thoroughly and apply evenly. Use the thinned mixture immediately.
Tools you will need
4.5 m2/Ltr @ 125 Micron DFT**
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
56% +/- 2%
High corrosion resistance
Low water permeability
Resistant to salt
Good chemical and water resistance
Make Your Plan
Let us design a project plan to suit your needs.