Apcoflor MFP 140
A high-solid, solvent-free floor primer perfect for use under epoxy floor top coat or screed.
Surface preparation Prepare surfaces by blasting (allow new surfaces to cure first). Acid etching is recommended, followed by a water wash. Remove dust with a vacuum pump.
Application procedure Mix the base and hardener as per instructions. Apply Apcoflor MFP 140 primer immediately after mixing without any induction time. Apply two coats of primer on porous flooring.
Tools you will need
3.6 m2/Ltr @ 250 Micron DFT**
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Penetration & sealing properties
Suitable primer for all Apcoflor Topcoat series
Excellent chemical resistance
Make Your Plan
Let us design a project plan to suit your needs.