Apcoflor HSC - 3 (Screed)
A durable and tough, low VOC floor coating for areas with heavy traffic including industrial units, parking areas and ramps.
Features
See all
Abrasion-resistant
High flexural strength
High tensile strengthSurface preparation Prepare the surfaces by blasting (allow new surfaces to cure first). Acid etching is recommended, followed by a water wash. Remove dust with a vacuum pump. Apply Apcoflor Solvent Free Primer or HFP 120 primer. Apply two coats of primer on porous flooring.
Application procedure Mix the base and hardener as per instructions. Start screeding before the primer loses tack. Pour the entire Apcoflor HSC-3 Screed material and spread uniformly on the surface using a suitable trowel to get the required screed thickness. Tamp the laid material with a wooden float to ensure compactness. Finish the surface with a suitable steel trowel. Coverage will vary significantly based on the nature of the concrete surface.
Tools you will need
Available Packs
20 kg
1 Coat
0.15 m2/kg @ 3 mm dft**
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Washability
- Best-in-class
- High
- Medium
- Low
we also recommend
Apcoflor SL - 4
Apcoflor TC - 600
Apcoflor TC - 600
A polyurethane-based floor coating that is ideal for exterior and interior applications, including ramps, car parks and processing units.
High flexural strengthHigh tensile strength
Apcoflor TC - 510
Apcoflor TC - 510
A hygienic, hard-wearing, epoxy-based, low VOC floor coating for food processing units or warehouses.
High flexural strengthHigh tensile strengthLuxaflor - 4000
Luxaflor - 4100
Floor Guard Epoxy
Product Data Sheet
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Guides
