Touchwood PU Primer Exterior
A hard-wearing, acrylic PU primer, designed to go under pigmented exterior top coats.
Surface preparation Sand the surface thoroughly with emery paper. Wipe it clean with a dry rag and remove all traces of sanded wood, followed by a wipe with the PU Thinner.
Application procedure Thoroughly mix the base and hardener of Touchwood PU Primer Exterior using full quantities of both. Apply two even coats as needed. Make sure to stir the contents thoroughly before and during use, with a broad flat stirrer.
Tools you will need
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
56% +/- 2%
Good hiding of base
Good resistance to household chemicals and beverages
Make Your Plan
Let us design a project plan to suit your needs.