Others in this category
  • Berger Epilux 58  Semi Matt Finish Epoxy Coating for Metals
  • Berger Epilux 70 Abrasion Resistant Epoxy Primer for Industrial Use
  • Berger Epilux 78 Corrosion Resistent Epoxy Based Industrial Primer
  • Berger Epimastic 5100 High Corrosion Resistance Semi Gloss Epoxy Coat
  • Berger Luxaprime 1500 polyvinyl butyral wash Primer
  • Berger Special Value Rust Preventing Red Oxide Wall Primer

Special Value Red Oxide Primer

A synthetic, resin primer pigmented with Red Oxide and other rust-preventing pigments, designed to protect steel.

A general purpose metal primer, based on synthetic resin, pigmented with Red Oxide and other rust-inhibitive pigments, that provide short-term protection for steel during and immediately after fabrication. The primer can also be applied to non-blast-cleaned surfaces.

Features

Prevents rusting
Finishes -Low Sheen

Surface preparation Remove all contaminants. Clean and dry the surface. Scrape away loose and flaking paint. Consolidate surfaces subject to chalking or dusting with Plastaseal Penetrating Sealer.

Application procedure Thin Red Oxide primer with Solvalux 1. Apply two coats of Red Oxide Primer with adequate time between coats, taking care to avoid runs and sags.

Tools you will need

Brush
Spray
Roller

Available Packs

Berger Special Value Rust Preventing Red Oxide Wall Primer
3.5 Ltr

Berger Special Value Rust Preventing Red Oxide Wall Primer
18 Ltr

Berger Special Value Rust Preventing Red Oxide Wall Primer
900 ml

1 Coat
11.00 m2/Ltr**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Volume Solids


50 % +/- 0.5%

Solve Potential Paint Problems

1Reddish brown stains have appeared on the surface of my painted wall.

These reddish brown stains are caused by the rusting of nails on the painted surface.

What are the possible causes?

  • Bleeding of rust to the top coat from non galvanised iron nails
  • Rust from galvanised nail heads due to sanding and extreme weathering

How can I fix the problem?

  • Before painting on a new surface which uses non galvanised nails, countersink the nailheads, and caulk with a high quality water based acrylic caulk.
  • Spot prime each nailhead and paint with a quality latex coating.
  • If you’re trying to fix existing nailhead rusting, wash off rust stains and sand the nailheads. Then, countersink, caulk and spot prime as above. Paint with a high quality latex coating.

We recommend you use this painting system to avoid this problem the next time around:

  • Special Value Red Oxide Primer
  • Royale Luxury Matt Emulsion
  • Special Value Red Oxide Primer
  • Royale Luxury Silk Emulsion
  • Special Value Red Oxide Primer
  • Royale Superflat Emulsion
  • Epilux Concrete Primer
  • Weathercoat Ultra - Silk
  • Epilux Concrete Primer
  • Weathercoat Ultra - Matt
  • Epilux Concrete Primer
  • Weathercoat Flex Smooth
  • Epilux Concrete Primer
  • Weathercoat Flex-Tex Ultra
  • Epilux Concrete Primer
  • Weathercoat Flex-Tex Fine
  • Epilux Concrete Primer
  • Weathercoat Flex-Tex Medium
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Guides

decor lounge/dealer locator

Locate
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!