Features
See allSurface preparation Clean the surface thoroughly. Make sure it is dry and free of all dust, contaminants and fungal growth. Remove any laitance (accumulation of particles on fresh concrete) by wire brush or sweep blast. Prep the surface by applying one coat of Alkali Resistant Primer followed by two coats of Stucco.
Application procedure Apply two coats of Royale Superflat Emulsion with adequate time between the coats. Apply evenly taking care to avoid runs and sags. Do refer to the product sheet for details on drying time, thinning ratio, and other information.
Tips Stir the contents thoroughly and apply evenly.
Tools you will need
Available Packs
1 Coat
6.33 m²/Ltr****
Coverage
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
Washability
- Best-in-class
- High
- Medium
- Low
we also recommend
-
Get Inspiration
-
Make Your Plan
Let us design a project plan to suit your needs.
-
Colour Guides