A high-solid, high-build, low VOC self-priming, anti-corrosive epoxy coating that can be used as a finish or along with a top coat in tough environments.
Surface preparation Clean the surface with solvent to remove wax, oil and grease. Remove all traces of soluble salts, dirt and dust by dry brushing. Wash with fresh water. Remove loose or flaking coatings. Round off all rough weld seams and sharp edges so that you have a smooth surface to work with.
Application procedure Epimastic 5100 is designed to be a primer-cum-finish. However, in immersed conditions it performs best with a top coat. Use an airless spray or conventional. For difficult shapes and touching up, use a brush or roller.
Tips Stir the contents thoroughly and apply evenly. Use the thinned mixture immediately.
Tools you will need
6.5 m2/Ltr @ 125 Micron DFT**
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
82% +/- 2%
High corrosion resistance
Make Your Plan
Let us design a project plan to suit your needs.