Others in this category
  • Berger Epilux 58  Semi Matt Finish Epoxy Coating for Metals
  • Berger Epilux 70 Abrasion Resistant Epoxy Primer for Industrial Use
  • Berger Epilux 78 Corrosion Resistent Epoxy Based Industrial Primer
  • Berger Epimastic 5100 High Corrosion Resistance Semi Gloss Epoxy Coat
  • Berger Luxaprime 1500 polyvinyl butyral wash Primer
  • Berger Special Value Rust Preventing Red Oxide Wall Primer

Epilux 70

A high-performance, epoxy primer with excellent anti-corrosive properties for a range of metals.

A two-pack, high-build, high-performance epoxy primer offering excellent abrasion resistance and adhesion to mild steel, galvanised iron, stainless steel, aluminium, copper, etc. It is perfect for use as blast primer for tank exteriors, structural steelwork, chemical plant pipelines and cranes.


See all
DurableAbrasion-resistantHigh corrosion resistance
Finishes -Matt to Eggshell

Surface preparation Blast clean and remove wax, oil and grease with a solvent cleaner. Remove weld spatter if necessary, rounding off all rough weld seams and sharp edges till the surface is smooth. Fill or treat surface defects. Make sure the surface to be coated is clean and dry. Non-ferrous metals such as GI, aluminium and copper must be wire brushed or sanded, and then thoroughly cleaned with the tool cleaner.

Application procedure Apply Epilux 70 with an airless spray, after mixing the base and hardener in the ratio 4:1. Overcoat it with a recommended coating as per the system chosen. An airless spray or conventional spray may also be used. Use a brush or roller only for difficult shapes or touching up.

Tools you will need

Airless Spray
Conventional Spray

Available Packs

Berger Epilux 70 Abrasion Resistant Epoxy Primer for Industrial Use
4 Ltr

Berger Epilux 70 Abrasion Resistant Epoxy Primer for Industrial Use
16 Ltr

1 Coat
7.6 m2/Ltr @ 75 Micron DFT**


On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Volume Solids

57% +/- 2%
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Guides

decor lounge/dealer locator

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!