Apcoflor HFP 120
A two-component, high-solid universal floor primer, perfect for use under epoxy floor top coat or screed.
Surface preparation Prepare surfaces by blasting (allow new surfaces to cure first). Acid etching is recommended, followed by a water wash. Remove dust with a vacuum pump.
Application procedure Mix base and hardener as per instructions. Apply Apcoflor HFP 120 primer, stirring frequently. Apply two coats of primer on porous flooring.
Tools you will need
16.0 m2/Ltr @ 50 Micron DFT**
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
90% +/- 2%
Penetration & sealing properties
Good bonding with old and new concrete surfaces
Perfect for highly porous substances
Excellent chemical resistance
Make Your Plan
Let us design a project plan to suit your needs.