Search
Best Results
Epimastic 4100
Epimastic 4100 is a two‑component surface‑tolerant, self‑priming universal epoxy primer/topcoat with excellent adhesion to carbon steel, galvanized iron, stainless steel, aluminium, and concrete. It is designed for versatile use where robust adhesion and simplified coating build‑up are required.
Anticorrosive
Excellent Adhesion
Self- Priming
Good Chemical & Water Resistance
Good Recoat-Ability
Uses
Characteristics
Properties
As a general maintenance coating for offshore installations.
As a chemically resistant primer for structural steelwork, pipelines, refineries, power plants, bridges, buildings etc.
As an anticorrosive undercoat to fireproofing coating.
Suitable as mid coat and topcoat for up to CX systems as per ISO12944 Part 2
MIO version also available for better barrier protection.
Good recoat-ability and curing in a wide range of climatic conditions.
Good Chemical and water resistance.
Suitable for variety of ferrous & nonferrous metals
Pre-qualified in accordance with ISO 12944-9 & NORSOK M-501 in selected systems
Also sold as Epimastic 4100 (M).
| Properties | Value |
|---|---|
| Volume Solids (Based on ASTM D2697) | 80 ± 2 % |
| DFT Range | 100-200 microns |
| Typical DFT | 150 microns |
| Equivalent WFT | 190 microns |
| Theoretical Spreading Rate | 5.3 m²/litre @ 150 microns DFT |
| Colour | Selected RAL Shade |
| VOC “As Supplied” (Based on US-EPA 24) | 180 gms/litre |
| Gloss Level | Low Sheen |
