Search
Best Results
Luxaprime 1500
Luxaprime 1500 is a two‑component polyvinyl butyral (PVB) etch/wash primer containing phosphoric acid and corrosion‑inhibitive pigments. It is intended to promote adhesion and corrosion resistance as a preparatory primer layer in suitable coating systems.
Good Adhesion
Etch Primer
Uses
Characteristics
Properties
Acidic pretreatment for non ferrous metals to ensure good adhesion of subsequent coatings e.g. aluminium cladding.
Suitable for use on new and aged clean galvanized steel.
Suitable as an Etch Primer for up to C4 Environment as per ISO12944 Part 2 along with suitable intermediates and topcoats.
Can be over coated with single pack and two pack products.
Contains phosphoric acid to etch the surface.
BS 5493 reference. Meets performance of AP2A.
| Properties | Value |
|---|---|
| Volume Solids (Based on ASTM D2697) | 8.5 ± 0.5 % |
| DFT Range | 5 -10 microns |
| Typical DFT | 5 microns |
| Equivalent WFT | 60 microns |
| Theoretical Spreading Rate | 17m²/litre @ 5 microns DFT |
| Colour | YelLow shade |
| VOC “As Supplied” (Based on US-EPA 24) | 737 gms/litre |
| Gloss Level | Low Sheen |
