Search
Best Results
Epilux 160
Epilux 160 is an easy‑to‑apply two‑component epoxy polyamide anti‑corrosive primer for interior or exterior steel. It provides strong, versatile rust prevention for general protective coating systems.
Anticorrosive
Excellent Chemical Resistance
Uses
Characteristics
Properties
Blast or holding primer for use in tanks and on all steel for high corrosive environments.
Sealer or Tie coat over inorganic zinc silicate primers, galvanized steel and thermally sprayed zinc.
Suitable for over coating with epoxies and polyurethanes.
Offers excellent chemical resistance with good abrasion resistance, ensuring long‑term performance.
Capable of achieving high film build in a single coat, improving application efficiency and productivity.
Suitable for use as a blast primer or holding primer for steel in tanks and aggressive environments.
Performs reliably in marine and other corrosive exposure conditions.
Acts as an effective tie coat over zinc silicate primers, ensuring good intercoat adhesion.
Compatible for overcoating with epoxies, polyurethanes, vinyl, and chlorinated rubber coating systems.
Conforms to BS 5493 and meets the performance requirements of KP1A classification
| Properties | Value |
|---|---|
| Volume Solids (Based on ASTM D2697) | 57 ± 2 % |
| DFT Range | 50-100 microns |
| Typical DFT | 75 microns |
| Equivalent WFT | 135 microns |
| Theoretical Spreading Rate | 7.6 m²/litre @ 75 microns DFT |
| Colour | Grey & Red oxide |
| VOC “As Supplied” (Based on US-EPA 24) | 380 gms/litre |
| Gloss Level | Matt |
