Search
Best Results
Epilux 8
Epilux 8 is a two‑component high‑build epoxy polyamine containing epoxy pitch, capable of high film build up to 400 microns in a single coat. It offers compatibility with cathodic protection, good abrasion resistance, and resistance to severe atmospheric exposure.
Cathodic Protection
Good Abrasion Resistance
Uses
Characteristics
Properties
For steel and concrete in continuous and intermittent immersion in fresh and salt water.
For use over prepared substrates such as steel and concrete in industrial environments. splash zones, jetty and bridge pilings and decks, Dam gates, Marine applications, Off shore drilling rigs, Heavy duty structural coating, Non-potable water tank, tank bottom (soil side) and buried/immersed line pipe coating.
Compatible with cathodic protection systems, suitable for immersed service conditions.
Can be applied directly on blast‑cleaned steel or over a suitable epoxy primer.
Provides good abrasion resistance for demanding service environments.
Highly resistant to severe atmospheric conditions.
Excellent performance in continuous and intermittent immersion in fresh and salt water Suitable for protection of ballast water tanks.
Designed for use as a topcoat in coating systems up to C5 corrosivity category as per ISO 12944‑2.
| Properties | Value |
|---|---|
| Volume Solids (Based on ASTM D2697) | 92 ± 2 % |
| DFT Range | 200-400 microns |
| Typical DFT | 250 microns |
| Equivalent WFT | 275 microns |
| Theoretical Spreading Rate | 3.68 m²/litre @ 250 microns DFT |
| Colour | Black & Brown |
| VOC “As Supplied” (Based on US-EPA 24) | 240 gms/litre |
| Gloss Level | Low sheen |
