Search
Best Results
SmartCare AL Polyurea
SmartCare AL Polyurea is an aliphatic polyurea membrane offering superior UV resistance and colour stability. Designed for applications requiring high performance and aesthetics, it can be built to any thickness in a single application.
Superior Tensile Strength
Eco-Friendly Formulation
Crack Bridging Ability
Industrial-grade Resistance
UV and colour stable, seamless waterproof membrane for pools, resort lagoons, artificial beaches and all marine applications.
Installation Speed
Extremely fast spray applied installation speed for rapid project completion.
Instant Curing
Provides instant curing, becoming touch dry in as little as 20 seconds.
Two Component System
A two component, high performance membrane designed for professional-grade protection.
Seamless Finish
Completely seamless application, even across multiple different substrates.
Excellent Adhesion
Excellent adhesion to most common construction materials including concrete, render, steel, aluminium, and concrete blocks.
Chemical Resistance
Resistant to most standard chemicals, salts, acids, alkalis, and fuel oils.
Extreme Climate Design
Specifically designed to perform in extreme climates.
Eco-Friendly Formulation
100% solids, VOC and solvent free composition.
Impact Resistance
Provides very high impact resistance to protect against physical damage.
Crack Bridging Properties
Excellent crack bridging Properties to maintain a waterproof seal over moving cracks.
| Properties | Value |
|---|---|
| Mixing ratio of comp.A to comp.B (by volume) | 1:1 |
| Tack free time @ 20°C | 10–20 sec |
| Overcoat cycle | 0–12 hrs (withoutpretreatment) |
| Tensile strength (ISO37-2005/ASTMD-638) | 22 Mpa |
| Elongation at break (ISO 37-2005/ASTMD-638) | 350–400% |
| Crack bridging ability(DIN EN 1062-7 Procedure C.2) +23°C | >15.5 mm / -10°C: >6.8 mm / -20°C: >6.4 mm |
| Pull-off strength (DIN EN ISO 4624 / ASTM D-4541) Concrete | 1.5 N/mm² |
| Tear growth resistance(ISO 34-1 method A) | 45 N/mm |
| Volume abrasion(DIN ISO 4649) | 130 mm³ |
| Solids content (DIN EN827 / ASTM D-2697) | 100% |
