Search
Best Results
Apcoflor HSC 3 Screed
Apcoflor HSC 3 is a three‑component epoxy resin‑based floor screed developed for heavy‑duty applications. The system delivers high mechanical strength and durability, making it suitable for industrial areas subjected to sustained load and wear.
Its robust formulation ensures long‑term performance in demanding operational environments.
Heavy-Duty Protection
Excellent Chemical Resistance
Good Non-skid Properties
Uses
Characteristics
Properties
Heavy duty ramps, floorings and vehicle parking
Loading unloading bay for heavy duty vehicles
High abrasion floors for engineering plants
Workshops, dairies, breweries, food processing, automotive and chemical plants.
Excellent resistance to mechanical wear and tear
Wide spectrum chemical resistance
Very good non-skid Properties
Can be epoxy top coated
Can be used for coving
| Properties | Value |
|---|---|
| Volume solids (ASTM D2697) | 100% |
| Typical Dry Film Thickness | 3 - 5 mm |
| Wet film thickness Finish | 3 – 5 mm Matt |
| Compressive strength (ASTM C 579) | 94.3 N/mm2 |
| Flexural strength (ASTM C 50) | 21.0 N/mm2 |
| Tensile strength (ASTM C 30) | 16.5 N/mm2 |
| Rapid chloride permeability (ASTM C 1202.97) | 96% |
| Chemical resistance | No changes were observed |
| Hot water resistance (ASTM D 570) @ 70°C | No changes were observed |
| Abrasion Resistance (ASTM D 4060 | 01 -C17): Avg. weight loss of 1000 cycles (mg) – 54.3 mg |
| Thinner/ cleaning solvent | Solvalux7-45 |
| Flash point for mixed compound | > 28°C |
