Search
Best Results
SmartCare Repair MC
SmartCare Repair MC is a single-component, polymer-modified, shrinkage-compensated high-strength micro-concrete. When mixed with water it forms a fluid micro-concrete for mass infill and load-bearing structural repairs.
Excellent Workability
Excellent Bond Strength
High Early & Ultimate Strength
Excellent Water Resistant
Shrinkage control
Uses
Characteristics
Properties
SmartCare Repair MC can be used for major concrete and precast structural repair works, structural elements and other construction defects pertaining to all structural elements, such as repair on beams, columns, walls in high-rise buildings, Piers and cross beams on highway structures, marine structures, repairs to old columns, etc.
SmartCare Repair MC can be used for producing or reinstating Heavy floor screed, bolt anchoring and load-bearing base plates.
SmartCare Repair MC is recommended for filling inaccessible areas where the use of hand-applied mortars would be unfeasible.
SmartCare Repair MC, when mixed with water, produces a fLowable micro concrete for pumping/pouring/casting applications up to 100 mm thickness.
Easy Mixing and Workability
Strong Interface Bonding
High Structural Strength
Reinforcement Adhesion
Superior Water Resistance
Tropical Climate Resilience
High-Build Application
| Properties | Value |
|---|---|
| Component | Single |
| Form | Powder |
| Theoretical coverage | 1.3 m2/10 mm thickness approx. (This coverage is theoretical and depends upon the surface profile of the substrate and the wastage). |
| Yield | 13 litres approx. |
| Working time | 30 min |
| Compressive strength (ASTM C 109) | >25 N/mm² at 1 day, >50 N/mm² at 14 days, >65 N/mm² at 28 days |
| Working time | 30 minutes @30°C |
| Special ingredients | Polymer & binders Flexural strength (BS 6319 Part 3): >9 N/mm² at 28 days |
| Tensile strength (BS 6319-7) | 5.0 N/mm² at 28 days |
| Setting time (ASTM C 191) | Initial Set: 6 - 7 hours @ 35°C Final Set: 10-11 hours @ 35°C |
| Water absorption | < 0.01ml/m²/sec @ 2hrs |
| Water permeability | < 10mm |
| Fresh wet density | 2200 - 2300 kg/L |
