Search
Best Results
Epilux 219
Epilux 219 is a two‑component high‑solids epoxy coating formulated with high‑quality inert pigments to deliver outstanding chemical resistance. It is suitable for protective coating systems where chemical durability and low permeability are required.
Outst&ing Chemical Resistance
Low Water Permeability
Uses
Characteristics
Properties
High build epoxy for the protection of steel and concrete.
Suitable for application for structural steelwork, pipelines, refineries, power plants, bridges, buildings etc.
Suitable as intermediate coat for up to CX Environment as per ISO12944 Part 2 along with suitable system.
Available in standard and Micaceous Iron Oxide (MIO) variants, offering enhanced barrier and corrosion‑resistant properties.
Designed for use as a build coat for structural steel in aggressive service environments.
Provides good resistance to fresh and salt water, ensuring reliable performance in marine and industrial conditions.
Capable of achieving high film build in a single coat, improving application efficiency.
Exhibits low water permeability, enhancing long‑term corrosion protection.
Suitable for protection of steel and concrete substrates.
Recommended for structural steel, pipe exteriors, and tank exteriors in moderately polluted environments.
Designed for use as an intermediate coat in coating systems up to C5 corrosivity category as per ISO 12944‑2, when applied with a suitable coating system.
| Properties | Value |
|---|---|
| Volume Solids (Based on ASTM D2697) | 80 ± 2 % |
| DFT Range | 100-200 microns |
| Typical DFT | 150 microns |
| Equivalent WFT | 190 microns |
| Theoretical Spreading Rate | 5.3 m²/litre @ 150 microns DFT |
| Colour | White, Grey & Limited Shade Range |
| VOC “As Supplied” (Based on US-EPA 24) | 185 gms/litre |
| Gloss Level | Matt |
