Search
Best Results
Steelshield 1200
STEEL SHIELD 1200 is a two‑component, surface‑tolerant, high‑performance glass flake epoxy coating designed for extreme service conditions. Formulated to deliver high build, exceptional strength, and toughness, it provides long‑term protection in some of the most demanding environments.
Heat Resistance
Anticorrosive
Excellent Chemical Resistance, Abrasion, & Impact Resistance
Resistant to Cathodic Disb&ment
Uses
Characteristics
Properties
Carbon Steel, Stainless Steel, Galvanised Steel and Concrete structures in splash / tidal zone and buried vessels or pipelines in aggressive corrosion categories.
Can be used as a single coat maintenance system.
One coat high build film thickness up to 500µm DFT.
As a general maintenance coating for on-shore and off-shore installations.
Can be used as a non-slip deck coating with the appropriate anti-skid aggregates.
Can be used in conjunction with Cathodic Protection.
Suitable for up to CX Corrosivity Category as per ISO 12944-2
Suitable as a single coat maintenance system for onshore and offshore installations.
Able to cure underwater and at temperatures down to 5°C.
Outstanding barrier and anti-corrosive performance.
Excellent chemical, abrasion, and impact resistance.
Compatible with sacrificial anode and impressed current systems.
Resistant to cathodic disbondment.
Pre-qualified in accordance with ISO 12944-9 & NORSOK M-501 in selected systems.
| Properties | Value |
|---|---|
| Volume Solids (Based on ASTM D2697) | 90 ± 2 % |
| DFT Range | 200-500 microns |
| Typical DFT | 250 microns |
| Equivalent WFT | 280 microns |
| Theoretical Spreading Rate | 3.6 m2/litre @ 250 microns DFT |
| Colour | Grey & Limited Shade range |
| VOC “As Supplied” (Based on US-EPA 24) | 160 gms/litre |
| Gloss Level | Low Sheen |
