APCOTHERM EPN 200

System Description:

APCOTHERM EPN 200 is a two‑component epoxy phenolic high‑build coating with high crosslink density, providing combined corrosion and chemical resistance at elevated temperatures. It is particularly suited for use under insulation to help mitigate corrosion under insulation (CUI) in demanding service conditions.

Key Features

Recommended as corrosion resistant barrier coat to protect steelwork under thermal insulation subjected to wet or dry thermal cycles from -196°C to + 230°C.
Self priming coating with excellent adhesion on blast cleaned steel.
Suitable for exposure to a wide range of corrosive environments and exterior of insulated or un-insulated steel pipeline, process equipments, vessels, etc., operating continuously upto 200°C and intermittently at 250°C.
Excellent resistance to “Thermal Shock” experienced during rapid heating and cooling conditions.
Suitable as a topcoat upto C5 / CX Corrosivity Category as per ISO 12944.

/content/dam/professionals/images/packshots/Berger Luxathane.jpg

System Properties

70 ± 2 %

Volume Solids (Based on ASTM D2697)

100-200 microns

DFT Range

150 microns

Typical DFT

215 microns

Equivalent WFT

4.6 m²/litre @150 microns DFT

Theoretical Spreading Rate

Grey, Red oxide & Limited Shade Range

Colour

270 gms/litre

VOC (Based on US-EPA 24)

Low sheen

Gloss Level

All Products