Others in this category
  • Berger Epilux 58  Semi Matt Finish Epoxy Coating for Metals
  • Berger Epilux 78 Corrosion Resistent Epoxy Based Industrial Primer
  • Berger Epimastic 5100 High Corrosion Resistance Semi Gloss Epoxy Coat
  • Berger Luxaprime 1500 polyvinyl butyral wash Primer

Epilux 58

A polyamide-cured epoxy, reinforced with micaceous iron oxide for use as a build coat or intermediate coat in challenging environments.

Epilux 58 is designed for galvanised iron surfaces, particularly in industrial and offshore settings. This polyamide-cured epoxy finish coat is fortified with micaceous iron oxide, a compound that is one of the highest performing barrier pigments. It offers excellent resistance to UV, abrasion, chemicals and moisture. Epilux 58 is the perfect protective coating, especially when paired with the right system.

Features

High DurabilityExcellent Resistance to AbrasionExcellent Water and Chemical resistance
Finishes -MetallicSemi Matt

Surface preparation Blast clean and prime the surface with Epilux primer. Remove wax, oil and grease with a solvent cleaner. Remove weld spatter if necessary, rounding off all rough weld seams and sharp edges till surface is smooth. Fill or treat surface defects.

Application procedure Apply 2 coats of Epilux 58 with an airless spray. If required, overcoat it with the recommended coating as per system chosen. Use an airless spary or conventional spray. A brush or roller should be used only for difficult shapes or touching up.

Tips Stir the contents thoroughly and apply evenly. Use the thinned mixture immediately.

Tools you will need

Brush
Airless Spray
Conventional Spray
Roller

Available Packs

Berger Epilux 58  Semi Matt Finish Epoxy Coating for Metals
5 Ltr

Berger Epilux 58  Semi Matt Finish Epoxy Coating for Metals
15 Ltr

1 Coat
4.8 m2/Ltr @ 125 Micron DFT**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Volume Solids


60% +/- 2%
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Guides

decor lounge/dealer locator

Locate
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!