Themes

My Profile My Library Logout

Others in this category

Apcoflor MFP 140

A high-solid, solvent-free floor primer perfect for use under epoxy floor top coat or screed.

Product Data Sheet

Apcoflor MFP 140 is a two-pack, high-solid, solvent-free epoxy resin based floor primer that provides excellent adhesion between the concrete surface and epoxy top coat or screed. This environmentally friendly primer is ideal for the full range of Apcoflor top coats.

Features

Penetration & sealing properties

Suitable primer for all Apcoflor Topcoat series

Excellent chemical resistance

Finishes -Glossy

Surface preparation Prepare surfaces by blasting (allow new surfaces to cure first). Acid etching is recommended, followed by a water wash. Remove dust with a vacuum pump.

Application procedure Mix the base and hardener as per instructions. Apply Apcoflor MFP 140 primer immediately after mixing without any induction time. Apply two coats of primer on porous flooring.

Tools you will need

Stiff Brush

Available Packs

Berger Apcoflor MFP 140 is high solid Solvent-Free epoxy based Floor Primer
5 Ltr

Berger Apcoflor MFP 140 is high solid Solvent-Free epoxy based Floor Primer
20 Ltr

1 Coat
3.6 m²/Ltr @ 250 Micron DFT^**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

^** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Volume Solids

100%

Get Inspiration

Explore
Make Your Plan

Let us design a project plan to suit your needs.

Start
Colour Guides

Explore

decor lounge/dealer locator

Locate

Note:-

The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.